Assure MIMIX
Documentation
Articles
#FILATRMBR reporting ACCPTHVLD *YES on source and *NO on target
Upgrade/Install to MIMIX version 10.0.19 fails with qsh: 001-0019 error.
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
#MBRRCDCNT *PTY/*ALL runs but never end
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
CPF3763 - El objecto MXRPM__W0 de tipo *USRQ de la biblioteca MIMIX estaba dañado anteriormente.
Failed object activity entries "File OBJDATA in library QTEMP not found"
Assure MIMIX: MXREPMGR deleting objects on target even though SETMXPCY 'Object Only on Target' is *DISABLED
DLOATR audit getting error *MODTSP
#OBJATR flags *LIB objects with *TYPSPFIND *NE difference *RCYSBM but does not recover
AUI upgrade fails with VSE100F
How does MIMIX prevent replacing a customer step in a procedure when adding a new step?
CPF2151 error during OBJATR audit for *USRPRF
SQL9008 when replicating SQLPKG in INTRA data group or name-mapped environment.
INSPRD giving CPD0160 program INSMMX not found in library LAKEVIEW
WRKLICKEY - expiration date for one system does not match between Source and Target.
Does MIMIX use the parameter DTACPR during a SAVOBJ command and if so can it be altered?
LVE3DA1 When trying to run an Audit
WRKPRD has strange entries after installing Softlanding PDQ version 2.1.00A
Recovery stuck in capturing for non-existant object
AUI - Email address is not valid
How do I restart MXINTERNAL ?
How to get installed ASSURE product software version programmatically
How do I create a new data group (DG) in an existing MIMIX environment?
How can I programmatically determine if an application group is active?
VFYCMNLNK failed LVE3119 - IPv4-compatible IPv6 name
PORT jobs show increasing temp storage usage
How do I change the name of a System definition in MIMIX?
#FILATR *CSTNBR *NE *RCYFAILED - MIMIX
Start MIMIX managers - STRMMXMGR MGR(*SYS) - fails CPF9190 rc 6
VSP - Red ? for the instance, Portlets report "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
Recommended IBM i PTFs and CHKIBMPTF utility
Did You Know... Getting started with the VSP portal is as easy as 1, 2, 3?
#FILATR *CSTIND *NE
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Upgrade to 10.0.18 fails with error CPF9898 Reference found in one or more lib.
#FILATRMBR reporting ACCPTHVLD *YES on source and *NO on target
Upgrade/Install to MIMIX version 10.0.19 fails with qsh: 001-0019 error.
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
#MBRRCDCNT *PTY/*ALL runs but never end
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
Assure MIMIX: What are the default logging levels set to in the MIMIX Job descriptions?
CPF3763 - El objecto MXRPM__W0 de tipo *USRQ de la biblioteca MIMIX estaba dañado anteriormente.
Failed object activity entries "File OBJDATA in library QTEMP not found"
Assure MIMIX: MXREPMGR deleting objects on target even though SETMXPCY 'Object Only on Target' is *DISABLED
Assure MIMIX: Audits not running for one data group
Assure MIMIX: Failed object activity entry with message LVE31A8
MIMIX communications error rc XX (WRKDG white U) when SAM *EXIT Points SCK_ACCEPT/SCK_CONNEC turned on
Assure MIMIX: How are User Profiles enabled on new target after a switch?
Assure MIMIX: IFS Tracking entry in HLDERR - DBAPY LVE0101 RC 3025
Enforcive: Data Provider job locking receivers therefore MIMIX JRNMGR cannot delete them
DLOATR audit getting error *MODTSP
#OBJATR flags *LIB objects with *TYPSPFIND *NE difference *RCYSBM but does not recover
AUI upgrade fails with VSE100F
How to stop and start journaling for a file entry
MCH3601 from APYACCCDE when attempting to upgrade using the installation wizard
Updating incorrect system name or Serial-LPAR on LAKEVIEW/WRKLICKEY with UPDLICSUM
iWiz is failing on the Verify Product Shutdown panel
After upgrading AUI cannot log in Diagnostics Error on MeteredUsageProvider
Receiving 'Node Cannot be found' when entering log in information on AUI
How does MIMIX prevent replacing a customer step in a procedure when adding a new step?
CPF2151 error during OBJATR audit for *USRPRF
SQL9008 when replicating SQLPKG in INTRA data group or name-mapped environment.
Are there MIBs to monitor Assure MIMIX HA?
How can I find the version of tomcat that is used by AUI/VSP?
WRKRCY VIEW(*REPMGR) fails with SQL0104
USRSPC MMEXDJRN in QRCL - can this be deleted?
INSPRD upgrade failing with CPF3770 - No objects saved or restored for library #MIMIX#.
AUI - Portal connections lists error '[USER] A user-based operation was requested, but no user exists.
INSPRD giving CPD0160 program INSMMX not found in library LAKEVIEW
WRKLICKEY - expiration date for one system does not match between Source and Target.
Does MIMIX use the parameter DTACPR during a SAVOBJ command and if so can it be altered?
Virtual Switch Message Change of journal images to *BOTH for files failed
Assure Mimix Log4j 1.x CVE-2019-17571, CVE-2020-9488, CVE-2022-23302
CPF9E18 after changing over to SAN storage
How can I move DB replicated IFS to a new data group?
What version of the MIMIX Installation Wizard still supports Windows 7
Master monitor not started, rc SF
LVE3DA1 When trying to run an Audit
WRKPRD has strange entries after installing Softlanding PDQ version 2.1.00A
Recovery stuck in capturing for non-existant object
How do I replace the default field separator character in a .CSV file created by the SNDQJPF command?
T-SF (Create) entries stuck in PR
#MBRRCDCNT *FAILED LVE0113 rc 3447
iWiz upgrade - ERROR 3425 connect() failed
LVE0102 MIMIX detected internal error but continued processing.
CREATE OR REPLACE PROCEDURE - Replacing a stored procedure does not replicate to target
AUI - Email address is not valid
How do I restart MXINTERNAL ?
How to get installed ASSURE product software version programmatically
Upgrading with MIMIX 10.0.01 Installation Wizard having issues with License Keys
DBAPY in Mulit-Thread DG will not stay running - CPF1002
Metered Usage - ADDVSIAPP of meteredusage-pa-3.2.01.00.zip fails with VSE1007 RC 3490
How to Replicate the IBM JOBSCDE but not the Status?
ENDMMX fails LVE3F45 - Procedure in *PENDCNL
STRAG - LVE3F36 LVEC02B
How do I create a new data group (DG) in an existing MIMIX environment?
How can I programmatically determine if an application group is active?
VFYCMNLNK failed LVE3119 - IPv4-compatible IPv6 name
How do I add new IFS objects and directories to replication?
OBJAPY fails LVE0103 "findEntryForObjectOrAncestor"
How do I configure OnDemand Content Manager with UDFS?
#IFSATR audit showing *FID *NC
How do I change the MSGQ used by a journal?
How do I swap the System types?
PORT jobs show increasing temp storage usage
How do I change the name of a System definition in MIMIX?
#FILATR *CSTNBR *NE *RCYFAILED - MIMIX
Start MIMIX managers - STRMMXMGR MGR(*SYS) - fails CPF9190 rc 6
VSP - Red ? for the instance, Portlets report "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
How do I determine why a file entry is in *HLDERR with journal code U-MX error code IG?
DBRDR fails CPF504D - Field procedure error.
#FILDTA IGNOBJ *CO CPF4234 for files with Allow Read YES.
Recommended IBM i PTFs and CHKIBMPTF utility
Did You Know... Getting started with the VSP portal is as easy as 1, 2, 3?
#FILATR *CSTIND *NE
#FILDTA audit difference *REP - WRKDGFE shows member specific DGFEs in *CMPRPR or *CMPACT
DGFE in *HLDERR and cannot sync - SYNCDGFE METHOD(*SAVRST) fails LVE3087 rc FT - CPF322D
New library VSI001LIB following upgrade to 5.0.20.00 or above
IBM OS/400 PTF List for Syncsort High Availability Products
Assure iOptimize OS Compatibility Matrix
DG highlighted RED - files with Journaled status *DIFFJRN
Upgrade to 10.0.18 fails with error CPF9898 Reference found in one or more lib.
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
#FILATRMBR reporting ACCPTHVLD *YES on source and *NO on target
How can I set up a new MIMIX installation on version 8.0 or above?
How does the MIMIX software use disk space?
#FILATR *CSTIND *NE
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
ENDMMX fails LVE3F45 - Procedure in *FAILED status
#FILATR *TRGXSTIND *RCYSBM submitted recovery failed
MIMIX OS Compatibility Matrix
Is there a backout plan after installing a new Version or Service Pack of Assure MIMIX?
Install/Upgrade fails LVE100C rc 4 on command RTVMMXAM
Which communication ports are used by MIMIX ?
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
Updating incorrect system name or Serial-LPAR on LAKEVIEW/WRKLICKEY with UPDLICSUM
#IFSATR audit continues to report the same object with PGP differences.
How to get installed ASSURE product software version programmatically
WRKDG highlighted YELLOW - File Entries in *RLSWAIT for days
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
CPF3763 - El objecto MXRPM__W0 de tipo *USRQ de la biblioteca MIMIX estaba dañado anteriormente.
DEVD not found on target - failed CPF261A CPD8FF0 rc 1304
Failed object activity entries "File OBJDATA in library QTEMP not found"
How can I identify libraries and objects that are not included in replication?
Where is the list and meaning of values used by audit reports?
Assure MIMIX: Audits not running for one data group
File in *HLDERR - DBAPY gets CPF5035 rc 17 CPF5029
Objects in error FR LVE0103 CPF5035 rc 16
Assure MIMIX: IFS Tracking entry in HLDERR - DBAPY LVE0101 RC 3025
DBRDR fails CPF504D - Field procedure error.
Assure MIMIX: How to move files from one Data Group to a different data group
Assure MIMIX: WRKAUD Compliance shows *ATTN - WRKDG shows audits in yellow highlight
How do I change the name of a System definition in MIMIX?
What are the new features in MIMIX V7 ?
How do I change the MSGQ used by a journal?
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
VSP - Red ? for the instance, Portlets report "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
Upgrade to 10.0.18 fails with error CPF9898 Reference found in one or more lib.
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
#FILATRMBR reporting ACCPTHVLD *YES on source and *NO on target
#OBJATR flags *LIB objects with *TYPSPFIND *NE difference *RCYSBM but does not recover
Upgrade/Install to MIMIX version 10.0.19 fails with qsh: 001-0019 error.
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
LVE100C rc 1 Product-level security error for a command in MIMIX or License Manager (LAKEVIEW)
How can I set up a new MIMIX installation on version 8.0 or above?
How does the MIMIX software use disk space?
#FILATR *CSTIND *NE
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
VSP - Red ? for the instance, Portlets report "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
ENDMMX fails LVE3F45 - Procedure in *PENDCNL
iWiz IUINSTALL failed CPF2451 lock on MIMIXQGPL/MIMIX *MSGQ
ENDMMX fails LVE3F45 - Procedure in *FAILED status
#FILATR *TRGXSTIND *RCYSBM submitted recovery failed
MIMIX OS Compatibility Matrix
Assure MIMIX: Can the SAVFs ##M** in MIMIX, ##IOPT** in IOPT, and #LICMGR** in LAKEVIEW be deleted?
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
DG highlighted RED - files with Journaled status *DIFFJRN
How do I delete a data group?
WRKDG shows RED L for source DB
<mimix command> failed - LVE0127
Is there a backout plan after installing a new Version or Service Pack of Assure MIMIX?
Install/Upgrade fails LVE100C rc 4 on command RTVMMXAM
Which communication ports are used by MIMIX ?
#MBRRCDCNT *PTY/*ALL runs but never end
How to stop and start journaling for a file entry
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
MCH3601 from APYACCCDE when attempting to upgrade using the installation wizard
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
Updating incorrect system name or Serial-LPAR on LAKEVIEW/WRKLICKEY with UPDLICSUM
#IFSATR audit continues to report the same object with PGP differences.
How do I sync a bi-directional file?
Assure iOptimize OS Compatibility Matrix
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
Start MIMIX managers - STRMMXMGR MGR(*SYS) - fails CPF9190 rc 6
WRKLICKEY - expiration date for one system does not match between Source and Target.
How to get installed ASSURE product software version programmatically
WRKDG highlighted YELLOW - File Entries in *RLSWAIT for days
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
Ending and starting of MIMIX - Best practice
Assure MIMIX: What are the default logging levels set to in the MIMIX Job descriptions?
CPF8111 - Partial damage on member MASTER in file LVMSGLOGP in library MIMIX
DGFE in *HLDERR and cannot sync - SYNCDGFE METHOD(*SAVRST) fails LVE3087 rc FT - CPF322D
Damage to MXBLKTRKL1 MCH1604 CPF3741 or CPF8112 - Full damage on member MXBLKTRKL1 file MXBLKTRKL1 in <mimix>
What NOT to mirror for FTP Manager/PGP
CPF3763 - El objecto MXRPM__W0 de tipo *USRQ de la biblioteca MIMIX estaba dañado anteriormente.
DEVD not found on target - failed CPF261A CPD8FF0 rc 1304
Failed object activity entries "File OBJDATA in library QTEMP not found"
Assure MIMIX: MXREPMGR deleting objects on target even though SETMXPCY 'Object Only on Target' is *DISABLED
How to prevent *NEW MMNFYNEWE notifications for IFS directories
#MBRRCDCNT *DIFFNORCY
Technical Alert: Open Commit Cycles with STRDG CLRPND(*YES)
Technical Alert: Long-running #MBRRCDCNT audit, CMPRCDCNT command
MIMIX procedures when performing a hardware upgrade with a disk image change
How can I identify libraries and objects that are not included in replication?
Where is the list and meaning of values used by audit reports?
Assure MIMIX: Audits not running for one data group
#FILATR not recovering trigger difference DBAPY shows CPF3156
Recommended IBM i PTFs and CHKIBMPTF utility
How to replicate job schedule entries from WRKJOBSCDE
Assure MIMIX: Failed object activity entry with message LVE31A8
MIMIX communications error rc XX (WRKDG white U) when SAM *EXIT Points SCK_ACCEPT/SCK_CONNEC turned on
Assure MIMIX: How are User Profiles enabled on new target after a switch?
File in *HLDERR - DBAPY gets CPF5035 rc 17 CPF5029
Objects in error FR LVE0103 CPF5035 rc 16
Assure MIMIX: IFS Tracking entry in HLDERR - DBAPY LVE0101 RC 3025
Enforcive: Data Provider job locking receivers therefore MIMIX JRNMGR cannot delete them
How do I configure OnDemand Content Manager with UDFS?
How do I Replicate IBM's DCM?
Preparing for Application Upgrade
DLOATR audit getting error *MODTSP
TCP/IP Configured to Minimize Communication Problems when Switching, Ensuring all MIMIX Jobs Use the Correct Local IP Interface
DBRDR fails CPF504D - Field procedure error.
Assure MIMIX: How to move files from one Data Group to a different data group
Assure MIMIX: WRKAUD Compliance shows *ATTN - WRKDG shows audits in yellow highlight
When I upgrade OS/400-i5/OS-IBM i, what are the MIMIX V7 (and above) considerations?
How do I uninstall or remove a MIMIX installation?
Assure MIMIX: AUI/VSP DPR error 'Display Trace'
Ending MIMIXSBS subsystem before ending MIMIX replication
AUI upgrade fails with VSE100F
LVE3DA1 When trying to run an Audit
How do I change the name of a System definition in MIMIX?
What are the new features in MIMIX V7 ?
How do I change the MSGQ used by a journal?
Technical Alert TA_MX7.1_204 - MIMIX v7.1 May Utilize Multi-threaded Jobs
IBM OS/400 PTF List for Syncsort High Availability Products
How do I add new IFS objects and directories to replication?
SQL9008 when replicating SQLPKG in INTRA data group or name-mapped environment.
New library VSI001LIB following upgrade to 5.0.20.00 or above
VFYCMNLNK failed - LVE3118 - Database name incorrect
Recommended IBM i PTFs and CHKIBMPTF utility
How do I add a library for replication to an existing data group?
MIMIX OS Compatibility Matrix
Which communication ports are used by MIMIX ?
Upgrading with MIMIX 10.0.01 Installation Wizard having issues with License Keys
How do I uninstall or remove a MIMIX installation?
How do you change the IP address used by MIMIX?
How do I add a new library for replication to an existing data group within v7.0 and prior?
How do I add new IFS objects and directories to replication?
Did You Know... Configuration Is Simplified with MIMIX Data Protection Reports?
Download location for MIMIX Service Packs
Did You Know... Getting started with the VSP portal is as easy as 1, 2, 3?
No File Entry Exists - #DGFE reports *UA
#DGFE *UA - fails to add DGFE for LFs, PFs or PF-SRCs
Audit reports *PRVAUTIND - how do I synchronize just authorities
How to exclude objects from replication
What are the LAKEVIEW and MIMIXOWN user profile authority and password requirements?
#FILDTA IGNOBJ *CO CPF4234 for files with Allow Read YES.
#FILATR *JRNOMIT *NC - how do I correct?
When I migrate hardware, what are the MIMIX V8 (and above) considerations?
DBRDR fails MCH3203 LVE3931 rc XX
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
#FILDTA LVE0103 MIMIX detected internal error and ended processing
MIMIX procedures when performing a hardware upgrade with a disk image change
OBJAPY fails LVE0103 "findEntryForObjectOrAncestor"
Ending and starting of MIMIX - Best practice
Preparing for Application Upgrade
DG highlighted RED - files with Journaled status *DIFFJRN
VSP - Red ? for the instance, Portlets report "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
Assure MIMIX: How to move files from one Data Group to a different data group
How to Replicate the IBM JOBSCDE but not the Status?
Assure MIMIX: WRKAUD Compliance shows *ATTN - WRKDG shows audits in yellow highlight
How can I set up a new MIMIX installation on version 8.0 or above?
Recommended IBM i PTFs and CHKIBMPTF utility
How do I add a library for replication to an existing data group?
MIMIX OS Compatibility Matrix
MIMIX Administrator Reference - 9.0
#FILATR *CSTIND *NE
What is the MIMIX Best Practice to handle file entries on *HLDERR?
#FILDTA Long Run Time - MIMIX DR
What are the different methods for synchronizing a physical file, and which method should I use?
WRKDG UNKNOWN for target processes
Which communication ports are used by MIMIX ?
Upgrading with MIMIX 10.0.01 Installation Wizard having issues with License Keys
How do I uninstall or remove a MIMIX installation?
How do I remove a library from replication in an existing data group?
When I upgrade OS/400-i5/OS-IBM i, what are the MIMIX V7 (and above) considerations?
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
How do I create a new data group (DG) in an existing MIMIX environment?
#FILATR *DBRIND differences
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
How do you change the IP address used by MIMIX?
How do I add a new library for replication to an existing data group within v7.0 and prior?
How do I add new IFS objects and directories to replication?
#FILATR *CSTNBR *NE *RCYFAILED - MIMIX
What are the different methods for synchronizing a physical file, and which method should I use?
MIMIX Operations 5250 - 9.0
How to remove an IFS directory from Object replication
How do I exclude files from replication?
#FILATRMBR *ACCPTHVLD *NE - *NO for source
Did You Know... Configuration Is Simplified with MIMIX Data Protection Reports?
Download location for MIMIX Service Packs
Did You Know... Getting started with the VSP portal is as easy as 1, 2, 3?
How to replicate job schedule entries from WRKJOBSCDE
Remote Journal Link performance investigation
How do I determine why a file entry is in *HLDERR with journal code U-MX error code IG?
How does the MIMIX software use disk space?
What is the MIMIXOWN password, can I change it?
#FILDTA audits fail - LVE3D52 or LVE0101 rc 3021
No File Entry Exists - #DGFE reports *UA
#DGFE *UA - fails to add DGFE for LFs, PFs or PF-SRCs
Audit reports *PRVAUTIND - how do I synchronize just authorities
LVE100C rc 1 Product-level security error for a command in MIMIX or License Manager (LAKEVIEW)
#OBJATR *SQLSP *NE *RCYFAILED
Readme - Assure MIMIX 9.0.17.00
#FILDTA, #MBRRCDCNT audits report *FF for SQL materialized query tables
Can the MIMIX source and target systems be at different operating system releases?
#FILATR *TRGXSTIND *RCYSBM submitted recovery failed
How to exclude objects from replication
What are the LAKEVIEW and MIMIXOWN user profile authority and password requirements?
#FILDTA IGNOBJ *CO CPF4234 for files with Allow Read YES.
JRNMGR not deleting journal receivers
How do I perform a complete synchronization of a data group?
How does running RGZPFM on the source system affect MIMIX?
iTERA OS Compatibility Matrix
Cannot get Communications working LVE0113 rc 3447 - WRKSYS *UNKNOWN
MIMIX Administrator Reference - 8.0
#FILATR *JRNOMIT *NC - how do I correct?
When I migrate hardware, what are the MIMIX V8 (and above) considerations?
DBRDR fails MCH3203 LVE3931 rc XX
How do I create a data group?
#FILDTA audit difference *REP - WRKDGFE shows member specific DGFEs in *CMPRPR or *CMPACT
#FILATR reports trigger differences: *TRGNBR *TRGIND *TRGXSTIND
How do I convert an IFS data group from object only replication to use advanced journaling?
How do I temporarily turn off target journal inspection?
How do I delete a data group?
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
#FILDTA LVE0103 MIMIX detected internal error and ended processing
MIMIX procedures when performing a hardware upgrade with a disk image change
TCP/IP Configured to Minimize Communication Problems when Switching, Ensuring all MIMIX Jobs Use the Correct Local IP Interface
What are the object types supported for replication?
#IFSATR audit showing *FID *NC
LVE0102 MIMIX detected internal error but continued processing.
#FILATR *JRNIMG *NC for same files every day
Where is the list and meaning of values used by audit reports?
OBJAPY fails LVE0103 "findEntryForObjectOrAncestor"
Ending and starting of MIMIX - Best practice
Preparing for Application Upgrade
Recovery stuck in capturing for non-existant object
How do I change the name of a System definition in MIMIX?
How do I Replicate IBM's DCM?
How do I swap the System types?
Changing maximum calculated thread groups for CMPFILDTA *CALC, #FILDTA *LEVEL30
How do I add one or more file(s) in a library to a data group?
DG highlighted RED - files with Journaled status *DIFFJRN
VSP - Red ? for the instance, Portlets report "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
Assure MIMIX: How to move files from one Data Group to a different data group
DBRDR fails CPF504D - Field procedure error.
What NOT to mirror for FTP Manager/PGP
How do I replicate a file but not the data in the file?
DEVD not found on target - failed CPF261A CPD8FF0 rc 1304
How to prevent *NEW MMNFYNEWE notifications for IFS directories
Assure iOptimize OS Compatibility Matrix
How to Replicate the IBM JOBSCDE but not the Status?
Assure MIMIX: WRKAUD Compliance shows *ATTN - WRKDG shows audits in yellow highlight
How can I set up a new MIMIX installation on version 8.0 or above?
#MBRRCDCNT *DIFFNORCY
DBAPY in Mulit-Thread DG will not stay running - CPF1002
File in *HLDERR - DBAPY gets CPF5035 rc 17 CPF5029
#MBRRCDCNT *FAILED LVE0113 rc 3447
Assure MIMIX: Can the SAVFs ##M** in MIMIX, ##IOPT** in IOPT, and #LICMGR** in LAKEVIEW be deleted?
T-SF (Create) entries stuck in PR
Downloads
Assure MIMIX contains self-service downloads within Precisely Data Experience for user accounts with active entitlements:
For more details, please see the Precisely Data Experience user guide.
- Go to Precisely Data Experience.
- Select My Software Products. You may be prompted for a login if not already authenticated.
- Select on the product to download. Product naming conventions may slightly differ and other products may also display.
- Once within a product, the latest version will be displayed by default and older versions can be selected via the Release dropdown.
- Select any product file to download.
For more details, please see the Precisely Data Experience user guide.
Licenses
Assure MIMIX offers self-service keys within License Keys for user accounts with active entitlements:
- Go to License Keys.
- Click on the Emergency Key, LRP Upload or LKP Decryptor links next to your product. Product naming conventions may slightly differ and other products may also display. Note that you may need to switch the Support Site dropdown above the table if you have multiple contracts.
- Follow the instructions on the respective pages to create and download your key.