Assure MIMIX
Documentation
Articles
Assure MIMIX: After installing a new LKP file then remote journaling ended and would not start.
Determine the Ciphers installed in OpenSSH
System Managers won’t start - MCH3401 - Cannot resolve to object QICSS
iWiz/INSPRD - installation cancelled or failed with internal CPFA0A9 error message id
Assure MIMIX: Source Obj in Threshold on many data groups using *SHARED OBJSND, determining which data group is causing the threshold
Assure MIMIX: Disabled data group showing source side processes partially enabled
LVE100C Product-Level Security error 1 for CHGPROCSTS in Product H1
Configuring a data group to use Journal centric configuration with Auto-configure for journals
Error number 3490 received from OS/400 API open.
LVE011D - GSKIT Secure Communications error 202 Occurred
SETMMXPCY CMNMODE(*UNSECURE *SECURE) results in LVE011D error 202
Assure MIMIX: After loading MIMIX 10.0.20.00 the AUI login page is no longer available
CHKPROCAUT PROC(RUNBACKUP) AGDFN(agname) USRPRF(user) failed
Assure Mimix AUI - Getting message "No configurable instances exist on this node" setting up a new instance
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
How can I migrate my current IBM i environment where MIMIX is running, to Skytap?
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
Assure MIMIX: Object errors for Printer Device description due to new Parameters SNMPUSR and SNMPCNTX
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
#MBRRCDCNT *PTY/*ALL runs but never end
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
Assure MIMIX: What are the default logging levels set to in the MIMIX Job descriptions?
Assure MIMIX: MXREPMGR deleting objects on target even though SETMXPCY 'Object Only on Target' is *DISABLED
Assure MIMIX: Audits not running for one data group
Assure MIMIX: Failed object activity entry with message LVE31A8
MIMIX communications error rc XX (WRKDG white U) when SAM *EXIT Points SCK_ACCEPT/SCK_CONNEC turned on
How to stop and start journaling for a file entry
Assure MIMIX: #OBJATR Audit continually recovering *LASTUSED for user profiles
Assure Mimix: Viewing audit differences details not working
Assure MIMIX HA: #FILATRMBR reporting *Basedonpf with different member on target
Assure MIMIX: MXREPMGR receives error CPD0082 Value for parameter CRTDATE not a valid date.
Mimix port job not starting - CPD0160
Assure MIMIX: What is the address the AUI connects to in order to retrieve licenses
Assure MIMIX: MXIFCMGR looping on CPF5129 error on LM3100p
Assure MIMIX: How to disable all audits at MIMIX 9.0 and above
Assure MIMIX: #IFSATR reporting *NOTFOUND for directories that exist
MIMIX job DPYDGCF errors with SQL0904 - Resource limit exceeded and LVE3A91 - Trigger program failed to run an SQL statement
#OBJATR *TYPSPFIND differences for printer *DEVDs - RTVCFGSRC shows SNMPUSR(*NONE) SNMPCNTX(*NONE) on one system but not the other
iWiz is failing on the Verify Product Shutdown panel
After upgrading AUI cannot log in Diagnostics Error on MeteredUsageProvider
Receiving 'Node Cannot be found' when entering log in information on AUI
AUI - Portal connections lists error '[USER] A user-based operation was requested, but no user exists.
DBAPY in a loop processing commit causes threshold
Configuring MIMIX to use DDM SSL for communication between IBM i systems
MXREPMGR joblog listing LVE0102 - MIMIX detected internal error but continued processing.
Does MIMIX use the parameter DTACPR during a SAVOBJ command and if so can it be altered?
CHKLIBREF utility to locate uses of Precisely libraries that will be affected by Public *EXCLUDE.
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
Assure MIMIX: Can AUI be configured to connect to the IBM i Host Server Secure ports?
Assure MIMIX: After installing a new LKP file then remote journaling ended and would not start.
Determine the Ciphers installed in OpenSSH
System Managers won’t start - MCH3401 - Cannot resolve to object QICSS
iWiz/INSPRD - installation cancelled or failed with internal CPFA0A9 error message id
Assure MIMIX: Source Obj in Threshold on many data groups using *SHARED OBJSND, determining which data group is causing the threshold
How Mimix handles expiration date.
QSYSOPR messages CPF7091 rc 1 and CPI2283
AUI: The AUI server will not start after upgrading to 10.0.23.00 - QSH0005 and VSE1002
Assure MIMIX: Disabled data group showing source side processes partially enabled
LVE100C Product-Level Security error 1 for CHGPROCSTS in Product H1
Configuring a data group to use Journal centric configuration with Auto-configure for journals
Assure MIMIX: When a switch is performed in a 3 node Application Group, what position in the list of backup nodes does the primary node switch to?
MIMIX for MQ - v10
Assure MIMIX DR: After applying new MIMIX DR key cannot access MIMIX - LVE100B RC6
Why can Access Path Maintenance (APM) not be configured for a multithreaded data group
WRKNFY *NEW *ERROR notification states: License key for *MIMIXHA1 failed, but continuing in grace.
Loading the MIMIX drivers while file systems are still mounted for MIMIX for AIX
Error number 3490 received from OS/400 API open.
LVE011D - GSKIT Secure Communications error 202 Occurred
SETMMXPCY CMNMODE(*UNSECURE *SECURE) results in LVE011D error 202
STRMMXMGR fails with LVE3A84 rc SL
Why does MIMIXOWN need to be a member of the QMQMADM group profile?
Remote Journal active but applies are not processing
Assure MIMIX: #OBJATR DTAQ continually reports *IGNOBJ
Assure MIMIX: After upgrading MIMIX the manageSubscriptions API is failing
#FILATR and #FILATRMBR in FAILED status
Assure MIMIX: After loading MIMIX 10.0.20.00 the AUI login page is no longer available
CHKPROCAUT PROC(RUNBACKUP) AGDFN(agname) USRPRF(user) failed
Assure Mimix AUI - Getting message "No configurable instances exist on this node" setting up a new instance
Assure Mimix - Virtual switch stuck on step MXCKDGEAPY
Assure MIMIX: System Manager RJ links will not start - CPD3E34 - gsk_secure_soc_read()
Applying an iTERA license key with UPDLICKEY fails CPF9E41 - Product 7VSI001 V6R0 feature 5084 not found
LAKEVIEW/INSPRD 10.0.19.00 or higher fails CPD0079 Value ' ' for SAVLIB not a name or generic name.
iWiz/IUINSTALL Fails with LMI0006-CPF2281
Upgrade/Install to MIMIX version 10.0.19 fails with qsh: 001-0019 error.
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
How can I migrate my current IBM i environment where MIMIX is running, to Skytap?
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
Assure MIMIX: Object errors for Printer Device description due to new Parameters SNMPUSR and SNMPCNTX
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
#MBRRCDCNT *PTY/*ALL runs but never end
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
Assure MIMIX: What are the default logging levels set to in the MIMIX Job descriptions?
Assure MIMIX: MXREPMGR deleting objects on target even though SETMXPCY 'Object Only on Target' is *DISABLED
Assure MIMIX: Audits not running for one data group
Assure MIMIX: Failed object activity entry with message LVE31A8
MIMIX communications error rc XX (WRKDG white U) when SAM *EXIT Points SCK_ACCEPT/SCK_CONNEC turned on
Assure MIMIX: How are User Profiles enabled on new target after a switch?
Assure MIMIX: IFS Tracking entry in HLDERR - DBAPY LVE0101 RC 3025
DLOATR audit getting error *MODTSP
#OBJATR flags *LIB objects with *TYPSPFIND *NE difference *RCYSBM but does not recover
Journal Receivers are building up on the Target for one DG CPF70ED
AUI upgrade fails with VSE100F
How to stop and start journaling for a file entry
Assure MIMIX: #OBJATR Audit continually recovering *LASTUSED for user profiles
Assure Mimix: Viewing audit differences details not working
Assure MIMIX: MIMIX #FILATRMBR audit not detecting or removing extra members on the target system
Assure MIMIX: What are the Supported Object types for MIMIX replication?
Assure MIMIX V10.0 Administrator Reference
How to schedule a Matrix report in AUI on Daily / Weekly / Monthly Basis
Can I review switching and other procedure history in Mimix?
Assure MIMIX: WRKAG opt 13 shows Resource Group in ATTN status for replication, opt 9 to start does not resolve the status
Assure MIMIX HA: #FILATRMBR reporting *Basedonpf with different member on target
Assure MIMIX: MXREPMGR receives error CPD0082 Value for parameter CRTDATE not a valid date.
Mimix port job not starting - CPD0160
Assure MIMIX: What is the address the AUI connects to in order to retrieve licenses
Assure MIMIX: MXIFCMGR looping on CPF5129 error on LM3100p
Assure MIMIX: How to disable all audits at MIMIX 9.0 and above
Assure MIMIX: #IFSATR reporting *NOTFOUND for directories that exist
MIMIX job DPYDGCF errors with SQL0904 - Resource limit exceeded and LVE3A91 - Trigger program failed to run an SQL statement
#OBJATR *TYPSPFIND differences for printer *DEVDs - RTVCFGSRC shows SNMPUSR(*NONE) SNMPCNTX(*NONE) on one system but not the other
iWiz is failing on the Verify Product Shutdown panel
After upgrading AUI cannot log in Diagnostics Error on MeteredUsageProvider
Receiving 'Node Cannot be found' when entering log in information on AUI
How does MIMIX prevent replacing a customer step in a procedure when adding a new step?
SQL9008 when replicating SQLPKG in INTRA data group or name-mapped environment.
Are there MIBs to monitor Assure MIMIX HA?
WRKRCY VIEW(*REPMGR) fails with SQL0104
USRSPC MMEXDJRN in QRCL - can this be deleted?
INSPRD upgrade failing with CPF3770 - No objects saved or restored for library #MIMIX#.
AUI - Portal connections lists error '[USER] A user-based operation was requested, but no user exists.
DBAPY in a loop processing commit causes threshold
Configuring MIMIX to use DDM SSL for communication between IBM i systems
MXREPMGR joblog listing LVE0102 - MIMIX detected internal error but continued processing.
Does MIMIX use the parameter DTACPR during a SAVOBJ command and if so can it be altered?
CHKLIBREF utility to locate uses of Precisely libraries that will be affected by Public *EXCLUDE.
Assure Mimix Log4j 1.x CVE-2019-17571, CVE-2020-9488, CVE-2022-23302
CPF9E18 after changing over to SAN storage
How can I move DB replicated IFS to a new data group?
Does the command LAKEVIEW/CHGMMXPRF require MIMIX to be ended?
STRJLNK CPF9190 RC 2 - invalid pwd after LAKEVIEW/CHGMMXPRF
DSPSVRAUTE USRPRF(MIMIXOWN) returns an empty list after LAKEVIEW/CHGMMXPRF
STRRJLNK CPF694D - Unexpected journal receiver found
WRKDG shows white U for target processes
Data Protection Report (DPR) Procedure stuck in Cancel pending
#FILATR continuously showing *RCDFMT *NE differences
Is there a way to omit a specific object from MIMIX audits?
#FILATR *RCDFMT *NE Differences
Uninstalling MIMIX installation
Changing the port that the VSP/AUI server is listening on
Did You Know... Getting started with the VSP/AUI Portal is as easy as 1, 2, 3?
WRKDG and F5 to refresh gives error CPF9801 - Object <jrn_name> in library <jrn_ lib> not found
Assure MIMIX: MXIFCMGR looping on CPF5129 error on LM3100p
Assure MIMIX: When a switch is performed in a 3 node Application Group, what position in the list of backup nodes does the primary node switch to?
Assure MIMIX: WRKAG opt 13 shows Resource Group in ATTN status for replication, opt 9 to start does not resolve the status
Can I review switching and other procedure history in Mimix?
Using MIMIX dr1
Files on target contain data even though DGOBJE OMTDTA *FILE or *MBR
CHKPROCAUT PROC(RUNBACKUP) AGDFN(agname) USRPRF(user) failed
Assure MIMIX: After upgrading MIMIX the manageSubscriptions API is failing
MQRCDIMG monitor fails with MQS.INI open API failure, errno = 3025
LVE011D - GSKIT Secure Communications error 202 Occurred
Mimix port job not starting - CPD0160
When loading a new version of MIMIX dr1, what causes a fatal error with message LVE100B – access code error 3?
JRNMGR not deleting Journal receivers - % system ASP used is increasing
Assure MIMIX: What is the address the AUI connects to in order to retrieve licenses
INSPRD gets error installing or upgrading - LVE1001 Pre-restore install processing failed
Assure MIMIX: What are the Supported Object types for MIMIX replication?
Assure MIMIX: After loading MIMIX 10.0.20.00 the AUI login page is no longer available
Does MIMIX dr1 replicate the content of data queues (DTAQ) or message queues (MSGQ)?
#OBJATR *TYPSPFIND differences for printer *DEVDs - RTVCFGSRC shows SNMPUSR(*NONE) SNMPCNTX(*NONE) on one system but not the other
Assure MIMIX: MXREPMGR receives error CPD0082 Value for parameter CRTDATE not a valid date.
DBAPY not starting - LVE387F rc DF, MCH2803 Machine storage limit overflow
STRDG CLRPND(*YES) fails LVE387F rc AP (open commit)
Assure MIMIX HA: #FILATRMBR reporting *Basedonpf with different member on target
System Managers won’t start - MCH3401 - Cannot resolve to object QICSS
iWiz/INSPRD - installation cancelled or failed with internal CPFA0A9 error message id
AUI: The AUI server will not start after upgrading to 10.0.23.00 - QSH0005 and VSE1002
Applying an iTERA license key with UPDLICKEY fails CPF9E41 - Product 7VSI001 V6R0 feature 5084 not found
#FILDTA audit difference *REP - WRKDGFE shows member specific DGFEs in *CMPRPR or *CMPACT
Assure MIMIX: Source Obj in Threshold on many data groups using *SHARED OBJSND, determining which data group is causing the threshold
QSYSOPR messages CPF7091 rc 1 and CPI2283
Does the command LAKEVIEW/CHGMMXPRF require MIMIX to be ended?
STRJLNK CPF9190 RC 2 - invalid pwd after LAKEVIEW/CHGMMXPRF
DSPSVRAUTE USRPRF(MIMIXOWN) returns an empty list after LAKEVIEW/CHGMMXPRF
CHKLIBREF utility to locate uses of Precisely libraries that will be affected by Public *EXCLUDE.
Syncing an IFS object when it is locked on the source system
How do I resync an entire library?
*ACCPTHVLD *NE audit errors every day
Assure MIMIX: After installing a new LKP file then remote journaling ended and would not start.
Assure MIMIX: Can AUI be configured to connect to the IBM i Host Server Secure ports?
STRRJLNK CPF694D - Unexpected journal receiver found
WRKDG shows white U for target processes
Data Protection Report (DPR) Procedure stuck in Cancel pending
Starting the MIMIX TCP server Port communication job
iWiz gets to Distribute Files and fails: Exit program denied request
iWiz gets to Distribute Files and fails: Exit program denied request
Determine the Ciphers installed in OpenSSH
MIMIX not resetting Journal Sequence number and approaching maximum - CPF7018 RC 1
#FILATR *NOTRCVD - CPF3876 for QIDCT*
#FILATR continuously showing *RCDFMT *NE differences
Is there a way to omit a specific object from MIMIX audits?
#FILATR *RCDFMT *NE Differences
MIMIX Upgrade path and License Key Requirements
MIMIX Administrator Reference - 9.0
MIMIX Administrator Reference - 8.0
What are the object types supported for replication?
STRMMX/ENDMMX fails with LVE3F45 - MIMIX cannot be ended at this time. Data Protection Report procedure in *ACTIVE status.
#FILDTA *FAILED LVE3D5E or LVI3D5F
Uninstalling MIMIX installation
Changing the port that the VSP/AUI server is listening on
Did You Know... Getting started with the VSP/AUI Portal is as easy as 1, 2, 3?
WRKDG and F5 to refresh gives error CPF9801 - Object <jrn_name> in library <jrn_ lib> not found
Assure MIMIX: MXIFCMGR looping on CPF5129 error on LM3100p
Assure MIMIX: When a switch is performed in a 3 node Application Group, what position in the list of backup nodes does the primary node switch to?
Loading the MIMIX drivers while file systems are still mounted for MIMIX for AIX
How do I change the job run priority of all the MIMIX audit jobs?
INSPRD fails CPF2242 Object QDFTJOBD not found in library list.
Assure MIMIX: WRKAG opt 13 shows Resource Group in ATTN status for replication, opt 9 to start does not resolve the status
Can I review switching and other procedure history in Mimix?
Using MIMIX dr1
Remote Journal active but applies are not processing
Assure MIMIX: Object errors for Printer Device description due to new Parameters SNMPUSR and SNMPCNTX
WRKNFY *NEW *ERROR notification states: License key for *MIMIXHA1 failed, but continuing in grace.
MIMIX exit points no longer required, how do I remove them?
INSPRD upgrade fails for LM - CPFA0A0 - Object already exists
MIMIX job DPYDGCF errors with SQL0904 - Resource limit exceeded and LVE3A91 - Trigger program failed to run an SQL statement
Files on target contain data even though DGOBJE OMTDTA *FILE or *MBR
CHKPROCAUT PROC(RUNBACKUP) AGDFN(agname) USRPRF(user) failed
Assure MIMIX: After upgrading MIMIX the manageSubscriptions API is failing
Configuring a data group to use Journal centric configuration with Auto-configure for journals
RCV_RUNCMD using a lot of CPU process - What does this job do?
CPF22E4 Password for user profile MIMIXOWN has expired
How to schedule a Matrix report in AUI on Daily / Weekly / Monthly Basis
JRNMGR and OBJSND jobs inactive - OUTQ MIMIXQGPL/MIMIX not found
Assure MIMIX V10.0 Administrator Reference
MQRCDIMG monitor fails with MQS.INI open API failure, errno = 3025
LVE011D - GSKIT Secure Communications error 202 Occurred
Mimix port job not starting - CPD0160
STRMMX fails CPF22E5 LVE0902 from QSTRUPJD
Can MIMIX dr1 function with the QTEMP or QGPL libraries in the System portion of the library list?
Why can Access Path Maintenance (APM) not be configured for a multithreaded data group
Assure Mimix - Virtual switch stuck on step MXCKDGEAPY
Assure MIMIX: System Manager RJ links will not start - CPD3E34 - gsk_secure_soc_read()
LAKEVIEW/INSPRD 10.0.19.00 or higher fails CPD0079 Value ' ' for SAVLIB not a name or generic name.
When loading a new version of MIMIX dr1, what causes a fatal error with message LVE100B – access code error 3?
JRNMGR not deleting Journal receivers - % system ASP used is increasing
Assure MIMIX: What is the address the AUI connects to in order to retrieve licenses
Data Group RJ link will not start - CPF694F rc 4
Why does MIMIXOWN need to be a member of the QMQMADM group profile?
AUI/VSP Nodes portlet shows Monitors partially active
Assure Mimix AUI - Getting message "No configurable instances exist on this node" setting up a new instance
Assure MIMIX: #OBJATR Audit continually recovering *LASTUSED for user profiles
DBAPY in a loop processing commit causes threshold
INSPRD gets error installing or upgrading - LVE1001 Pre-restore install processing failed
Assure MIMIX: What are the Supported Object types for MIMIX replication?
Assure MIMIX: After loading MIMIX 10.0.20.00 the AUI login page is no longer available
Does MIMIX dr1 replicate the content of data queues (DTAQ) or message queues (MSGQ)?
#OBJATR *TYPSPFIND differences for printer *DEVDs - RTVCFGSRC shows SNMPUSR(*NONE) SNMPCNTX(*NONE) on one system but not the other
Assure MIMIX: MXREPMGR receives error CPD0082 Value for parameter CRTDATE not a valid date.
Does MIMIX dr1 apply to the target system only the changed data from a file?
Assure MIMIX: MIMIX #FILATRMBR audit not detecting or removing extra members on the target system
Assure MIMIX: #OBJATR DTAQ continually reports *IGNOBJ
DBAPY not starting - LVE387F rc DF, MCH2803 Machine storage limit overflow
STRDG CLRPND(*YES) fails LVE387F rc AP (open commit)
Assure MIMIX HA: #FILATRMBR reporting *Basedonpf with different member on target
Assure MIMIX: #IFSATR reporting *NOTFOUND for directories that exist
RUNPTY For MIMIX audits
iWiz/IUINSTALL Fails with LMI0006-CPF2281
Assure Mimix: Viewing audit differences details not working
Assure MIMIX DR: After applying new MIMIX DR key cannot access MIMIX - LVE100B RC6
How does MIMIX dr1 replicate a file that is being cleared or reorganized?
System Managers won’t start - MCH3401 - Cannot resolve to object QICSS
iWiz/INSPRD - installation cancelled or failed with internal CPFA0A9 error message id
AUI: The AUI server will not start after upgrading to 10.0.23.00 - QSH0005 and VSE1002
Applying an iTERA license key with UPDLICKEY fails CPF9E41 - Product 7VSI001 V6R0 feature 5084 not found
#FILDTA audit difference *REP - WRKDGFE shows member specific DGFEs in *CMPRPR or *CMPACT
Assure MIMIX: Source Obj in Threshold on many data groups using *SHARED OBJSND, determining which data group is causing the threshold
LVE3D35 when issuing STRMMX
How Mimix handles expiration date.
QSYSOPR messages CPF7091 rc 1 and CPI2283
How do I add a library for replication to an existing data group?
MIMIX Administrator Reference - 9.0
#FILATR *CSTIND *NE
What is the MIMIX Best Practice to handle file entries on *HLDERR?
How do I obtain and apply MIMIX license keys for V7.x and above?
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
How do I create a new data group (DG) in an existing MIMIX environment?
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
How do I add a new library for replication to an existing data group within v7.0 and prior?
Did You Know... Getting started with the VSP/AUI Portal is as easy as 1, 2, 3?
How do I exclude files from replication?
Remote Journal Link performance investigation
MIMIX Operations 5250 - 9.0
#OBJATR *SQLSP *NE *RCYFAILED
No File Entry Exists - #DGFE reports *UA
How do I remove a library from replication at MIMIX V8 and above?
#FILDTA, #MBRRCDCNT audits report *FF for SQL materialized query tables
How do I perform a complete synchronization of a data group?
What are the LAKEVIEW and MIMIXOWN user profile authority and password requirements?
Audit reports *PRVAUTIND - how do I synchronize just authorities
How can I optimize TCP/IP communications for my MIMIX environment?
MXREPMGR joblog listing LVE0102 - MIMIX detected internal error but continued processing.
How does running RGZPFM on a production system affect MIMIX replication?
TCP/IP Configured to Minimize Communication Problems when Switching, Ensuring all MIMIX Jobs Use the Correct Local IP Interface
#FILATR *JRNOMIT *NC - how do I correct?
DBRDR fails MCH3203 LVE3931 rc XX
JRNMGR not deleting journal receivers
How do I delete a data group?
#FILATR reports trigger differences: *TRGNBR *TRGIND *TRGXSTIND
How do I troubleshoot TCP/IP communication problems that are affecting my MIMIX environment?
Readme - Assure MIMIX 9.0.17.00
How do I create a data group?
How do I resolve objects in error?
Starting the MIMIX TCP server Port communication job
MIMIX procedures when performing a hardware upgrade with a disk image change
Recovery stuck in capturing for non-existant object
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
How do I change the name of a System definition in MIMIX?
How do I swap the System types?
How do I add a library for replication to an existing data group?
MIMIX Administrator Reference - 9.0
#FILATR *CSTIND *NE
What are the different methods for synchronizing a physical file, and which method should I use?
Which communication ports are used by MIMIX ?
CHKLIBREF utility to locate uses of Precisely libraries that will be affected by Public *EXCLUDE.
#FILDTA Long Run Time - MIMIX DR
MIMIX Upgrade path and License Key Requirements
WRKDG UNKNOWN for target processes
What is the MIMIX Best Practice to handle file entries on *HLDERR?
How do I obtain and apply MIMIX license keys for V7.x and above?
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
Assure MIMIX: How to move files from one Data Group to a different data group
Uninstalling MIMIX installation
How do I remove a library from replication in an existing data group?
What does status *DLK mean in Open Commit Column?
When I upgrade OS/400-i5/OS-IBM i, what are the MIMIX V7 (and above) considerations?
#FILATR *DBRIND differences
How do I create a new data group (DG) in an existing MIMIX environment?
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
How do I add a new library for replication to an existing data group within v7.0 and prior?
How do you change the IP address used by MIMIX?
How to replicate job schedule entries from WRKJOBSCDE
How do I add new IFS objects and directories to replication?
Upgrading with MIMIX 10.0.01 Installation Wizard having issues with License Keys
What are the different methods for synchronizing a physical file, and which method should I use?
#FILATR *CSTNBR *NE *RCYFAILED - MIMIX
Did You Know... Getting started with the VSP/AUI Portal is as easy as 1, 2, 3?
How do I exclude files from replication?
Remote Journal Link performance investigation
How does the MIMIX software use disk space?
#FILATRMBR *ACCPTHVLD *NE - *NO for source
How to remove an IFS directory from Object replication
Did You Know... Configuration Is Simplified with MIMIX Data Protection Reports?
Download location for MIMIX Service Packs
How do I determine why a file entry is in *HLDERR with journal code U-MX error code IG?
MIMIX Operations 5250 - 9.0
#OBJATR *SQLSP *NE *RCYFAILED
No File Entry Exists - #DGFE reports *UA
Can the MIMIX source and target systems be at different operating system releases?
Cannot get Communications working LVE0113 rc 3447 - WRKSYS *UNKNOWN
How to exclude objects from replication
#DGFE *UA - fails to add DGFE for LFs, PFs or PF-SRCs
Assure MIMIX V10.0 Administrator Reference
#FILDTA audits fail - LVE3D52 or LVE0101 rc 3021
How do I remove a library from replication at MIMIX V8 and above?
#FILDTA, #MBRRCDCNT audits report *FF for SQL materialized query tables
How do I perform a complete synchronization of a data group?
What are the LAKEVIEW and MIMIXOWN user profile authority and password requirements?
Audit reports *PRVAUTIND - how do I synchronize just authorities
How can I optimize TCP/IP communications for my MIMIX environment?
MXREPMGR joblog listing LVE0102 - MIMIX detected internal error but continued processing.
How does running RGZPFM on a production system affect MIMIX replication?
TCP/IP Configured to Minimize Communication Problems when Switching, Ensuring all MIMIX Jobs Use the Correct Local IP Interface
#FILATR *JRNOMIT *NC - how do I correct?
DBRDR fails MCH3203 LVE3931 rc XX
JRNMGR not deleting journal receivers
Configuring MIMIX to use DDM SSL for communication between IBM i systems
CPF7091: Entry not journaled to journal <journal>. Reason code 4 -- Journal sequence number is at the maximum value
When I migrate hardware, what are the MIMIX V8 (and above) considerations?
MIMIX commands fail "LVE100B - License key error 6 for product **" after successful APYLICKEY
Syncing an IFS object when it is locked on the source system
#FILDTA IGNOBJ *CO CPF4234 for files with Allow Read YES.
How do I delete a data group?
#FILATR reports trigger differences: *TRGNBR *TRGIND *TRGXSTIND
How do I troubleshoot TCP/IP communication problems that are affecting my MIMIX environment?
iTERA OS Compatibility Matrix
How do I resync an entire library?
#FILDTA audit difference *REP - WRKDGFE shows member specific DGFEs in *CMPRPR or *CMPACT
#FILDTA LVE0103 MIMIX detected internal error and ended processing
#OBJATR *TYPSPFIND differences for printer *DEVDs - RTVCFGSRC shows SNMPUSR(*NONE) SNMPCNTX(*NONE) on one system but not the other
MIMIX Administrator Reference - 8.0
Readme - Assure MIMIX 9.0.17.00
How do I create a data group?
How do I resolve objects in error?
What are the object types supported for replication?
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
WRKSYS LVE3103 System definition *LOCAL not found
MIMIX not resetting Journal Sequence number and approaching maximum - CPF7018 RC 1
How do I change Journal image to *BOTH for some files in a library/data group?
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Starting the MIMIX TCP server Port communication job
MIMIX procedures when performing a hardware upgrade with a disk image change
Recovery stuck in capturing for non-existant object
How do I convert an IFS data group from object only replication to use advanced journaling?
How do I temporarily turn off target journal inspection?
STRDG CLRPND(*YES) fails LVE387F rc AP (open commit)
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
#FILATR *RCDFMT *NE Differences
How do I Replicate IBM's DCM?
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
How do I change the name of a System definition in MIMIX?
How do I swap the System types?
WRKDG Option 8 shows RED - RJ link monitor inactive
How do I add one or more file(s) in a library to a data group?
WRKAG App Node Status shows *ATTN and WRKNODE Manager Status shows *ATTN. MCH1604 - System object MXUIQ damaged
Audits in a *NOTRUN status
How do I change WRKRDBDIRE *LOCAL entries to all be the same?
STRMMX/ENDMMX fails with LVE3F45 - MIMIX cannot be ended at this time. Data Protection Report procedure in *ACTIVE status.
Downloads
Assure MIMIX contains self-service downloads within Precisely Data Experience for user accounts with active entitlements:
For more details, please see the Precisely Data Experience user guide.
- Go to Precisely Data Experience.
- Select My Software Products. You may be prompted for a login if not already authenticated.
- Select on the product to download. Product naming conventions may slightly differ and other products may also display.
- Once within a product, the latest version will be displayed by default and older versions can be selected via the Release dropdown.
- Select any product file to download.
For more details, please see the Precisely Data Experience user guide.
Licenses
Assure MIMIX offers self-service keys within License Keys for user accounts with active entitlements:
- Go to License Keys.
- Click on the Emergency Key, LRP Upload or LKP Decryptor links next to your product. Product naming conventions may slightly differ and other products may also display. Note that you may need to switch the Support Site dropdown above the table if you have multiple contracts.
- Follow the instructions on the respective pages to create and download your key.