Assure MIMIX
Documentation
Articles
SETMMXPCY CMNMODE(*UNSECURE *SECURE) results in LVE011D error 202
Restarting VSP and MXWS Process MIMIX for AIX
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
Assure MIMIX: What are the default logging levels set to in the MIMIX Job descriptions?
Assure MIMIX: IFS Tracking entry in HLDERR - DBAPY LVE0101 RC 3025
DLOATR audit getting error *MODTSP
#OBJATR flags *LIB objects with *TYPSPFIND *NE difference *RCYSBM but does not recover
CPF2151 error during OBJATR audit for *USRPRF
SQL9008 when replicating SQLPKG in INTRA data group or name-mapped environment.
Are there MIBs to monitor Assure MIMIX HA?
INSPRD giving CPD0160 program INSMMX not found in library LAKEVIEW
MXREPMGR joblog listing LVE0102 - MIMIX detected internal error but continued processing.
Does MIMIX use the parameter DTACPR during a SAVOBJ command and if so can it be altered?
Master monitor not started, rc SF
LVE3DA1 When trying to run an Audit
WRKPRD has strange entries after installing Softlanding PDQ version 2.1.00A
CREATE OR REPLACE PROCEDURE - Replacing a stored procedure does not replicate to target
AUI - Email address is not valid
How do I restart MXINTERNAL ?
STRAG - LVE3F36 LVEC02B
How do I create a new data group (DG) in an existing MIMIX environment?
How can I programmatically determine if an application group is active?
How do I change the MSGQ used by a journal?
MIMIXAMSVR high CPU usage
STRDG LVE3D35 Error starting DG after upgrading to MIMIX V6
MIMIX Upgrade path and License Key Requirements
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
How do I determine why a file entry is in *HLDERR with journal code U-MX error code IG?
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Error number 3490 received from OS/400 API open.
SETMMXPCY CMNMODE(*UNSECURE *SECURE) results in LVE011D error 202
Restarting VSP and MXWS Process MIMIX for AIX
STRMMXMGR fails with LVE3A84 rc SL
#FILATR and #FILATRMBR in FAILED status
#FILATRMBR reporting ACCPTHVLD *YES on source and *NO on target
Upgrade/Install to MIMIX version 10.0.19 fails with qsh: 001-0019 error.
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
Assure MIMIX: What are the default logging levels set to in the MIMIX Job descriptions?
Assure MIMIX: MXREPMGR deleting objects on target even though SETMXPCY 'Object Only on Target' is *DISABLED
Assure MIMIX: Audits not running for one data group
Scheduled STRMMX no longer works after upgrade to 10.0.16
Assure MIMIX: Failed object activity entry with message LVE31A8
MIMIX communications error rc XX (WRKDG white U) when SAM *EXIT Points SCK_ACCEPT/SCK_CONNEC turned on
Assure MIMIX: How are User Profiles enabled on new target after a switch?
Assure MIMIX: IFS Tracking entry in HLDERR - DBAPY LVE0101 RC 3025
DLOATR audit getting error *MODTSP
#OBJATR flags *LIB objects with *TYPSPFIND *NE difference *RCYSBM but does not recover
Journal Receivers are building up on the Target for one DG CPF70ED
AUI upgrade fails with VSE100F
iWiz is failing on the Verify Product Shutdown panel
After upgrading AUI cannot log in Diagnostics Error on MeteredUsageProvider
Receiving 'Node Cannot be found' when entering log in information on AUI
How does MIMIX prevent replacing a customer step in a procedure when adding a new step?
CPF2151 error during OBJATR audit for *USRPRF
SQL9008 when replicating SQLPKG in INTRA data group or name-mapped environment.
Are there MIBs to monitor Assure MIMIX HA?
How can I find the version of tomcat that is used by AUI/VSP?
WRKRCY VIEW(*REPMGR) fails with SQL0104
USRSPC MMEXDJRN in QRCL - can this be deleted?
INSPRD upgrade failing with CPF3770 - No objects saved or restored for library #MIMIX#.
AUI - Portal connections lists error '[USER] A user-based operation was requested, but no user exists.
How to configure MIMIX to use DDM SSL for communication between IBM i systems?
INSPRD giving CPD0160 program INSMMX not found in library LAKEVIEW
MXREPMGR joblog listing LVE0102 - MIMIX detected internal error but continued processing.
Does MIMIX use the parameter DTACPR during a SAVOBJ command and if so can it be altered?
CHKLIBREF utility to locate uses of Precisely libraries that will be affected by Public *EXCLUDE.
Virtual Switch Message Change of journal images to *BOTH for files failed
Assure Mimix Log4j 1.x CVE-2019-17571, CVE-2020-9488, CVE-2022-23302
CPF9E18 after changing over to SAN storage
How can I move DB replicated IFS to a new data group?
What version of the MIMIX Installation Wizard still supports Windows 7
Master monitor not started, rc SF
LVE3DA1 When trying to run an Audit
WRKPRD has strange entries after installing Softlanding PDQ version 2.1.00A
Recovery stuck in capturing for non-existant object
How do I replace the default field separator character in a .CSV file created by the SNDQJPF command?
T-SF (Create) entries stuck in PR
#MBRRCDCNT *FAILED LVE0113 rc 3447
iWiz upgrade - ERROR 3425 connect() failed
LVE0102 MIMIX detected internal error but continued processing.
CREATE OR REPLACE PROCEDURE - Replacing a stored procedure does not replicate to target
AUI - Email address is not valid
How do I restart MXINTERNAL ?
Upgrading with MIMIX 10.0.01 Installation Wizard having issues with License Keys
DBAPY in Mulit-Thread DG will not stay running - CPF1002
How much free disk space do I need to upgrade MIMIX
Metered Usage - ADDVSIAPP of meteredusage-pa-3.2.01.00.zip fails with VSE1007 RC 3490
How to Replicate the IBM JOBSCDE but not the Status?
ENDMMX fails LVE3F45 - Procedure in *PENDCNL
STRAG - LVE3F36 LVEC02B
How do I create a new data group (DG) in an existing MIMIX environment?
How can I programmatically determine if an application group is active?
VFYCMNLNK failed LVE3119 - IPv4-compatible IPv6 name
Did You Know... Checking for recommended IBM i PTFs is easy with CHKIBMPTF?
How do I add new IFS objects and directories to replication?
Updating your License Keys and Maintenance Information with iSeries Navigator
OBJAPY fails LVE0103 "findEntryForObjectOrAncestor"
How do I configure OnDemand Content Manager with UDFS?
How do I change the MSGQ used by a journal?
MIMIXAMSVR high CPU usage
STRDG LVE3D35 Error starting DG after upgrading to MIMIX V6
How can I optimize TCP/IP communications for my MIMIX environment?
How do I swap the System types?
PORT jobs show increasing temp storage usage
How do I change the name of a System definition in MIMIX?
#FILATR *CSTNBR *NE *RCYFAILED - MIMIX
How do I change WRKRDBDIRE *LOCAL entries to all be the same?
MIMIX Upgrade path and License Key Requirements
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
How do I determine why a file entry is in *HLDERR with journal code U-MX error code IG?
#FILDTA IGNOBJ *CO CPF4234 for files with Allow Read YES.
Recommended IBM i PTFs and CHKIBMPTF utility
WRKSYS Option 7 incorrectly shows *INACTRJ
#FILATR *CSTIND *NE
#FILDTA audit difference *REP - WRKDGFE shows member specific DGFEs in *CMPRPR or *CMPACT
New library VSI001LIB following upgrade to 5.0.20.00 or above
INSPRD failed - CPF5175 rc 1
MIMIX Upgrade path and License Key Requirements
How do I replace the default field separator character in a .CSV file created by the SNDQJPF command?
WRKAG App Node Status shows *ATTN and WRKNODE Manager Status shows *ATTN. MCH1604 - System object MXUIQ damaged
#FILDTA failing LVE3D4A - Unable to connect to server
Restarting VSP and MXWS Process MIMIX for AIX
BLDJRNENV/STRRJLNK - CPF9162 DDM issue
Audits in a *NOTRUN status
Matching order for object entries
JRNMGR changes receivers every 5 minutes
How do I change the MSGQ used by a journal?
#FILATRMBR *MBRNOTFND on source
Error msg LVE3D35 when starting dg, it is not part of a cluster
MIMIXAMSVR high CPU usage
System Managers are showing in *ACTREQ status, CPF6946 - Number <number> specified for key 2 not valid.
#FILATR and #FILATRMBR in FAILED status
CPF9E18, CPF9E71 or CPF9E72 in QSYSOPR
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
LVE100C rc 1 Product-level security error for a command in MIMIX or License Manager (LAKEVIEW)
How can I set up a new MIMIX installation on version 8.0 or above?
How does the MIMIX software use disk space?
#FILATR *CSTIND *NE
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
ENDMMX fails LVE3F45 - Procedure in *FAILED status
ENDMMX fails LVE3F45 - Procedure in *PENDCNL
iWiz IUINSTALL failed CPF2451 lock on MIMIXQGPL/MIMIX *MSGQ
#FILATR *TRGXSTIND *RCYSBM submitted recovery failed
MIMIX OS Compatibility Matrix
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: Audits not running for one data group
Recommended IBM i PTFs and CHKIBMPTF utility
How to replicate job schedule entries from WRKJOBSCDE
DLOATR audit getting error *MODTSP
TCP/IP Configured to Minimize Communication Problems when Switching, Ensuring all MIMIX Jobs Use the Correct Local IP Interface
Assure MIMIX: How to move files from one Data Group to a different data group
INSPRD failed - CPF5175 rc 1
MIMIX Upgrade path and License Key Requirements
How do I replace the default field separator character in a .CSV file created by the SNDQJPF command?
WRKRCY VIEW(*REPMGR) fails with SQL0104
How can I optimize TCP/IP communications for my MIMIX environment?
Scheduled STRMMX no longer works after upgrade to 10.0.16
How do I change WRKRDBDIRE *LOCAL entries to all be the same?
How do I stop replication to one node in multi-node environment?
WRKDG shows DG highlighted YELLOW - Journal cache N for Tgt
WRKAG App Node Status shows *ATTN and WRKNODE Manager Status shows *ATTN. MCH1604 - System object MXUIQ damaged
#FILDTA failing LVE3D4A - Unable to connect to server
Restarting VSP and MXWS Process MIMIX for AIX
Error number 3490 received from OS/400 API open.
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
SETMMXPCY CMNMODE(*UNSECURE *SECURE) results in LVE011D error 202
STRMMXMGR fails with LVE3A84 rc SL
VFYCMNLNK fails - RDB entries are wrong in TFRDFN
WRKTFRDFN Option 2 - putting in *SYSDB for System 1 or 2 relational database is not updating with proper RDB name, but is keeping *SYSDB
BLDJRNENV/STRRJLNK - CPF9162 DDM issue
Audits in a *NOTRUN status
Matching order for object entries
WRKMON Status INACTIVE - LVE4062 - Message queue does not exist
LVE4062 - Remote journal link monitor inactive
OBJAPY fails LVE0103 "findEntryForObjectOrAncestor"
Errors when replicating files in SYSIBM
Cannot get Communications working LVE0113 rc 3447 - WRKSYS *UNKNOWN
WRKDG Option 8 shows RED - RJ link monitor inactive
JRNMGR changes receivers every 5 minutes
How do I change the MSGQ used by a journal?
#FILATRMBR *MBRNOTFND on source
How do I create a data group?
DGFE *HLDERR - LVE375D rc W1
How do I convert a data group to use MIMIX Dynamic Apply?
After upgrading to V6, many entries are getting 'stuck' in PR/DA status.
OBJSND for IFS LVE0104 - Value -1517971047 for CCSID not valid
STRDG LVE3D35 Error starting DG after upgrading to MIMIX V6
Error msg LVE3D35 when starting dg, it is not part of a cluster
MIMIXAMSVR high CPU usage
System Managers are showing in *ACTREQ status, CPF6946 - Number <number> specified for key 2 not valid.
Object error for IFS - FA LVE0101 rc 3488 REMOVEDIR LVE3322
WRKSYS Option 7 incorrectly shows *INACTRJ
#FILDTA LVE0103 lvSqlCliGetColumnInfoAndRecord
#OBJATR *CRTTSP *RECOVERED every time - *USRQ LDAP QGLDPUBQ
What is the MIMIXOWN password, can I change it?
Support of F-IT / SQL identity column recording
#FILATR and #FILATRMBR in FAILED status
CPF9E18, CPF9E71 or CPF9E72 in QSYSOPR
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
#FILATRMBR reporting ACCPTHVLD *YES on source and *NO on target
#OBJATR flags *LIB objects with *TYPSPFIND *NE difference *RCYSBM but does not recover
Upgrade/Install to MIMIX version 10.0.19 fails with qsh: 001-0019 error.
Is the REXEC service required for the MIMIX replication?
DB in P status on the target after STRDG
Assure AUI: Not able to access the MIMIX Instance on AUI after upgrading MIMIX to 10.0.15.00 or higher
LVE100C rc 1 Product-level security error for a command in MIMIX or License Manager (LAKEVIEW)
How can I set up a new MIMIX installation on version 8.0 or above?
How does the MIMIX software use disk space?
#FILATR *CSTIND *NE
License Manager: Upgrade failing- joblog contains CPF4AB8 and LVE010B
Assure MIMIX: #FILATR continually reports *CSTIND differences but WRKPFCST shows the same for both systems
VSP is showing a red question mark (?) for my MIMIX instance, and when selecting the instance all the nodes state. "The nodes for this instance no longer match the nodes (SYSDFNs) configured in the MIMIX installation."
ENDMMX fails LVE3F45 - Procedure in *FAILED status
ENDMMX fails LVE3F45 - Procedure in *PENDCNL
iWiz IUINSTALL failed CPF2451 lock on MIMIXQGPL/MIMIX *MSGQ
#FILATR *TRGXSTIND *RCYSBM submitted recovery failed
MIMIX OS Compatibility Matrix
Assure MIMIX: DBAPYB in *DLK, LVE311D message states the MT apply job is causing the deadlock.
How do I delete a data group?
WRKDG shows RED L for source DB
<mimix command> failed - LVE0127
Which communication ports are used by MIMIX ?
Assure AUI: After logging into AUI it takes excessive time to bring up the MIMIX Status
Assure MIMIX: Logical Files showing as Not journaled in the file entries on a *SYSJRN data group
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
Assure MIMIX: Can the local journal receiver on the source system be deleted if RJ has fully replicated it to the target system?
Assure MIMIX: DBAPYT continually logging CPF5034 and CPF5009 and not applying any data
Assure MIMIX: Can a MIMIX Monitor be synchronized from one system to another?
Assure MIMIX: What are the default logging levels set to in the MIMIX Job descriptions?
Assure MIMIX: MXREPMGR deleting objects on target even though SETMXPCY 'Object Only on Target' is *DISABLED
MIMIX procedures when performing a hardware upgrade with a disk image change
How can I identify libraries and objects that are not included in replication?
Assure MIMIX: Audits not running for one data group
Recommended IBM i PTFs and CHKIBMPTF utility
How to replicate job schedule entries from WRKJOBSCDE
Assure MIMIX: Failed object activity entry with message LVE31A8
MIMIX communications error rc XX (WRKDG white U) when SAM *EXIT Points SCK_ACCEPT/SCK_CONNEC turned on
Assure MIMIX: How are User Profiles enabled on new target after a switch?
Assure MIMIX: IFS Tracking entry in HLDERR - DBAPY LVE0101 RC 3025
How do I configure OnDemand Content Manager with UDFS?
How do I Replicate IBM's DCM?
DLOATR audit getting error *MODTSP
TCP/IP Configured to Minimize Communication Problems when Switching, Ensuring all MIMIX Jobs Use the Correct Local IP Interface
Assure MIMIX: How to move files from one Data Group to a different data group
Journal Receivers are building up on the Target for one DG CPF70ED
Assure MIMIX: WRKAUD Compliance shows *ATTN - WRKDG shows audits in yellow highlight
When I upgrade OS/400-i5/OS-IBM i, what are the MIMIX V7 (and above) considerations?
How do I uninstall or remove a MIMIX installation?
Assure MIMIX: AUI/VSP DPR error 'Display Trace'
Ending MIMIXSBS subsystem before ending MIMIX replication
Recommended IBM i PTFs and CHKIBMPTF utility
How do I add a library for replication to an existing data group?
MIMIX OS Compatibility Matrix
Which communication ports are used by MIMIX ?
What is the MIMIX Best Practice to handle file entries on *HLDERR?
WRKDG UNKNOWN for target processes
How do I remove a library from replication in an existing data group?
When I upgrade OS/400-i5/OS-IBM i, what are the MIMIX V7 (and above) considerations?
Upgrading with MIMIX 10.0.01 Installation Wizard having issues with License Keys
How do I add new IFS objects and directories to replication?
#FILATR *CSTNBR *NE *RCYFAILED - MIMIX
What are the different methods for synchronizing a physical file, and which method should I use?
MIMIX Operations 5250 - 9.0
Remote Journal Link performance investigation
How does the MIMIX software use disk space?
#FILDTA audits fail - LVE3D52 or LVE0101 rc 3021
#DGFE *UA - fails to add DGFE for LFs, PFs or PF-SRCs
Can the MIMIX source and target systems be at different operating system releases?
What are the LAKEVIEW and MIMIXOWN user profile authority and password requirements?
#FILDTA, #MBRRCDCNT audits report *FF for SQL materialized query tables
How do I perform a complete synchronization of a data group?
When I migrate hardware, what are the MIMIX V8 (and above) considerations?
#FILATR reports trigger differences: *TRGNBR *TRGIND *TRGXSTIND
iTERA OS Compatibility Matrix
#FILDTA LVE0103 MIMIX detected internal error and ended processing
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
MIMIX commands fail "LVE100B - License key error 6 for product **" after successful APYLICKEY
How can I optimize TCP/IP communications for my MIMIX environment?
How do I convert an IFS data group from object only replication to use advanced journaling?
Cannot add instance to VSP portal
How do I swap the System types?
Changing maximum calculated thread groups for CMPFILDTA *CALC, #FILDTA *LEVEL30
How do I add one or more file(s) in a library to a data group?
Recommended IBM i PTFs and CHKIBMPTF utility
How do I add a library for replication to an existing data group?
MIMIX OS Compatibility Matrix
MIMIX Administrator Reference - 9.0
#FILATR *CSTIND *NE
What are the different methods for synchronizing a physical file, and which method should I use?
Using MIMIX from the Assure Unified Interface - 9.0 (formerly Using MIMIX from VSP)
CHKLIBREF utility to locate uses of Precisely libraries that will be affected by Public *EXCLUDE.
#FILDTA Long Run Time - MIMIX DR
Which communication ports are used by MIMIX ?
What is the MIMIX Best Practice to handle file entries on *HLDERR?
WRKDG UNKNOWN for target processes
How do I obtain and apply MIMIX V7.x or V8.x license keys manually?
MIMIX Upgrade path and License Key Requirements
How do I obtain and apply MIMIX license keys for V7.x and above?
CPF9E18, CPF9E71 or CPF9E72 in QSYSOPR
Assure MIMIX: How to manually upgrade/install MIMIX without the wizard.
How do I uninstall or remove a MIMIX installation?
How do I remove a library from replication in an existing data group?
When I upgrade OS/400-i5/OS-IBM i, what are the MIMIX V7 (and above) considerations?
Upgrading with MIMIX 10.0.01 Installation Wizard having issues with License Keys
What does status *DLK mean in Open Commit Column?
#FILATR *DBRIND differences
How do I create a new data group (DG) in an existing MIMIX environment?
How do you change the IP address used by MIMIX?
#FILDTA *FAILED CMPFILDTA LVE0101 rc 3426 or rc 3424 API RECV
How do I add a new library for replication to an existing data group within v7.0 and prior?
How do I add new IFS objects and directories to replication?
#FILATR *CSTNBR *NE *RCYFAILED - MIMIX
What are the different methods for synchronizing a physical file, and which method should I use?
Updating your License Keys and Maintenance Information with iSeries Navigator
How to replicate job schedule entries from WRKJOBSCDE
How do I exclude files from replication?
#FILATRMBR *ACCPTHVLD *NE - *NO for source
Did You Know... Configuration Is Simplified with MIMIX Data Protection Reports?
How to remove an IFS directory from Object replication
MIMIX Operations 5250 - 9.0
Remote Journal Link performance investigation
How does the MIMIX software use disk space?
Download location for MIMIX Service Packs
Did You Know... Checking for recommended IBM i PTFs is easy with CHKIBMPTF?
LVE100C rc 1 Product-level security error for a command in MIMIX or License Manager (LAKEVIEW)
What is the MIMIXOWN password, can I change it?
How do I determine why a file entry is in *HLDERR with journal code U-MX error code IG?
No File Entry Exists - #DGFE reports *UA
#FILDTA audits fail - LVE3D52 or LVE0101 rc 3021
#DGFE *UA - fails to add DGFE for LFs, PFs or PF-SRCs
Can the MIMIX source and target systems be at different operating system releases?
Audit reports *PRVAUTIND - how do I synchronize just authorities
Cannot get Communications working LVE0113 rc 3447 - WRKSYS *UNKNOWN
#OBJATR *SQLSP *NE *RCYFAILED
MXREPMGR joblog listing LVE0102 - MIMIX detected internal error but continued processing.
#FILATR *TRGXSTIND *RCYSBM submitted recovery failed
How to exclude objects from replication
What are the LAKEVIEW and MIMIXOWN user profile authority and password requirements?
#FILDTA, #MBRRCDCNT audits report *FF for SQL materialized query tables
How do I perform a complete synchronization of a data group?
JRNMGR not deleting journal receivers
How does running RGZPFM on the source system affect MIMIX?
Assure Unified Interface 3.2 User Guide (formerly VSP 3.2 User Guide)
Readme - Assure MIMIX 9.0.17.00
#FILDTA IGNOBJ *CO CPF4234 for files with Allow Read YES.
TCP/IP Configured to Minimize Communication Problems when Switching, Ensuring all MIMIX Jobs Use the Correct Local IP Interface
When I migrate hardware, what are the MIMIX V8 (and above) considerations?
#FILATR reports trigger differences: *TRGNBR *TRGIND *TRGXSTIND
iTERA OS Compatibility Matrix
How do I delete a data group?
#FILATR *JRNOMIT *NC - how do I correct?
MIMIX Administrator Reference - 8.0
DBRDR fails MCH3203 LVE3931 rc XX
How do I sync an IFS object when it is locked on the source system?
#FILDTA audit difference *REP - WRKDGFE shows member specific DGFEs in *CMPRPR or *CMPACT
#FILDTA LVE0103 MIMIX detected internal error and ended processing
Large file in *HLDERR - CMPFILDTA LVE0101 3455 broken pipe
MIMIX commands fail "LVE100B - License key error 6 for product **" after successful APYLICKEY
How do I create a data group?
What are the object types supported for replication?
How much free disk space do I need to upgrade MIMIX
MIMIX procedures when performing a hardware upgrade with a disk image change
How do I temporarily turn off target journal inspection?
How do I change Journal image to *BOTH for some files in a library/data group?
How can I optimize TCP/IP communications for my MIMIX environment?
How do I convert an IFS data group from object only replication to use advanced journaling?
Cannot add instance to VSP portal
Recovery stuck in capturing for non-existant object
OBJAPY fails LVE0103 "findEntryForObjectOrAncestor"
LVE0102 MIMIX detected internal error but continued processing.
How to configure MIMIX to use DDM SSL for communication between IBM i systems?
How do I Replicate IBM's DCM?
How do I change the name of a System definition in MIMIX?
How do I swap the System types?
Changing maximum calculated thread groups for CMPFILDTA *CALC, #FILDTA *LEVEL30
How do I add one or more file(s) in a library to a data group?
Assure MIMIX: How to move files from one Data Group to a different data group
How can I set up a new MIMIX installation on version 8.0 or above?
Assure MIMIX: Product-Level Security (PLS) Changes for Assure MIMIX
WRKAG App Node Status shows *ATTN and WRKNODE Manager Status shows *ATTN. MCH1604 - System object MXUIQ damaged
BLDJRNENV/STRRJLNK - CPF9162 DDM issue
How do I replicate a file but not the data in the file?
Downloads
Assure MIMIX contains self-service downloads within Precisely Data Experience for user accounts with active entitlements:
For more details, please see the Precisely Data Experience user guide.
- Go to Precisely Data Experience.
- Select My Software Products. You may be prompted for a login if not already authenticated.
- Select on the product to download. Product naming conventions may slightly differ and other products may also display.
- Once within a product, the latest version will be displayed by default and older versions can be selected via the Release dropdown.
- Select any product file to download.
For more details, please see the Precisely Data Experience user guide.
Licenses
Assure MIMIX offers self-service keys within License Keys for user accounts with active entitlements:
- Go to License Keys.
- Click on the Emergency Key, LRP Upload or LKP Decryptor links next to your product. Product naming conventions may slightly differ and other products may also display. Note that you may need to switch the Support Site dropdown above the table if you have multiple contracts.
- Follow the instructions on the respective pages to create and download your key.